True SPL1000 - Page 16

16
ITEM PART NUMBER DESCRIPTION QTY
1 SPL-10-MFR000X MAIN FRAME ASSEMBLY 1
2 SPL-10-UPR200X UPRIGHT ASSEMBLY 1
3 SPL-00-RCK001 HOLDER, PHONE 1
4 SPL10PDKT PAD KIT, PEC FLY REAR DELT 1
5 SPL-00-CVR021 CAP, UPRIGHT 1
6 SPL-00-CVR022 TRAY, UPRIGHT COVER 1
7 SPL-10-ARM000X ARM, LEFT, ASSEMBLY 1
8 SPL-10-ARM220X PIVOT ARM, LEFT, LOWER,
ASSEMBLY
1
9 SPL-10-CAM100X CAM ASSEMBLY 1
10 SPL-10-CBL000 SUBASSEMBLY, CABLE, MAIN
FRAME, SPL1000
1
11 SPL-10-CBL100X SUBASSEMBLY, CABLE, UPRIGHT,
SPL1000
1
12* SPLSRDPS* SHROUD SET SHORT ACRYLIC, SPL 1*
13* SPLSRDMS* SHROUD SET, SPL, SHORT METAL 1*
14 SPL-00-GRD101X GUIDE ROD ASSEMBLY 2
15** SPL-00-WBR002** WEIGHT STACK BUMPER 6**
16*** SPL-00-TPL200X*** SUBASSEMBLY, TOP WEIGHT -
GENERATION 1
1***
17*** SPL-00-TPL300X*** SUBASSEMBLY, TOP WEIGHT -
GENERATION 2
1***
18** SPLBX15** SUBASSEMBLY, SPL WEIGHT
PLATES 4X15LB
4**
19 MAN-SPL1000 MANUAL, SPL1000 1
BOX CONTENTS
NOTE: Supplemental unboxing video available on vimeo.com: https://vimeo.com/723498648?share=copy.
*Acrylic or metal shrouds are
dependent on the confi guration that
was ordered.
**Weight stack and bumper quantities
are dependent on the weight
confi guration that was ordered.
***
16
Generation 1 Top Weight
SPL-00-TPL200X is only compatible
with SPL-ADRWT REV02 or lower.
***
17
Generation 2 Top Weight
SPL-00-TPL300X is only compatible
with SPL-ADRWT REV03 or higher.