15
TRUE
milk coolers
www
.truemfg.com
GENERAL MAINTENANCE
To clean interior of cooler move the unit close to a floor drain.
Remove floor racks from inside of the unit. Wash interior of the tank.
At the rear of the unit and below the grill there is a tank drain plug
that will need to be removed to release the waste from inside of the
unit. After all waste material is gone from the tank, reinsert the tank
drain plug in the rear of the unit. See photos 1 and 2 below.
FOR ADDITIONAL MAINTENANCE INSTRUCTION,
PLEASE VISIT THE MEDIA CENTER AT
WWW.TRUEMFG.COM
2
1
Tank Drain
To Next Page
Loading...
