To Next PageTo Next Page
Need help?Do you have a question about the True GDM-26-HC~TSL01 and is the answer not in the manual?
General| Type | Glass Door Merchandiser |
|---|---|
| Temperature Range | 33°F to 38°F |
| Number of Shelves | 4 |
| Exterior Material | Powder Coated Steel |
| Lighting | LED |
| Power Supply | 115/60/1 |
| Refrigerant | R290 |
| Capacity | 26 cu. ft. |
| Interior Material | Stainless Steel Floor |
Defines symbols and signal words used in the manual for warnings and instructions.
General safety precautions for appliance installation, operation, and maintenance.
Specific hazards and precautions to prevent personal injury during use.
Safety guidelines related to the use of flammable hydrocarbon refrigerants.
Precautions to prevent child entrapment and fire hazards during appliance disposal.
Critical safety information regarding electrical connections, grounding, and wiring.
Key technical details and operating parameters of the appliance.
Required space around the appliance for proper ventilation and operation.
Specifications for power supply, voltage, and circuit protection.
Guidelines for safely connecting the appliance to the electrical supply.
Instructions for converting wiring configurations for 115V systems.
Steps and precautions for safely removing the appliance from its packaging.
Guidelines for selecting a suitable installation site for the appliance.
Procedures for installing leveling components for stability.
Specific instructions for installing castors on GDM-10/12 models.
Critical steps to ensure the appliance is level for proper operation.
Procedure for sealing the appliance to the floor for NSF compliance.
Instructions and tips for properly installing shelves within the appliance.
Initial steps and recommendations for starting the appliance for the first time.
Information on locating and operating temperature and light controls.
Explanation of the feature that shifts between refrigerator and freezer modes.
Overview of the appliance's operational cycle, including defrost.
Guidance on replacing parts using OEM components for safety and warranty.
A schedule and list of routine tasks for maintaining the appliance.
Detailed procedure for cleaning the condenser coils to ensure efficiency.
Guidelines for cleaning interior, exterior, and gasket surfaces.
Instructions for maintaining and cleaning stainless steel surfaces.
Advice on preventing corrosion and rust on stainless steel.
Instructions for safely removing the appliance's slide doors.
Procedure for adjusting slide doors to ensure proper fit and closure.
Explanation of how to use the feature that keeps doors open.
Details on warranty coverage and terms for specific regions.
