STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
30
1
/16"
(764 mm)
55
29
/32"
(1421 mm)
3
7
/8"
(99 mm)
TWT-27 TFPY01E TFPY01S TFPY01P TFPY013
TWT-27
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, lower
utility costs, exceptional food safety and
the best value in today’s food service
marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) 134A
refrigerant.
• Oversized, factory balanced refrigeration
system with guided airfl ow to provide
uniform product temperatures.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains cabinet
temperatures of 33°F to 38°F (.5°C to
3.3°C) for the best in food preservation.
• Sealed, cast iron, self-lubricating
evaporator fan motor(s) and larger fan
blades give True worktop units a more
effi cient low velocity, high volume
airfl ow design. This unique design
insures faster temperature recovery
and shorter run times in the busiest of
foodservice environments.
• Condensing unit access in back of cabinet,
slides out for easy maintenance.
CABINET CONSTRUCTION
• Exterior - stainless steel front,
top and cabinet ends. Matching
aluminum fi nished back. Cabinet top
and backsplash - one piece formed
construction. Bacteria and food particles
can not be trapped underneath as with
other two-piece worktop units.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless fl oor
with coved corners.
• Insulation - entire cabinet structure
and solid door is foamed-in-place using
high density, CFC free, polyurethane
insulation.
• 5" (127 mm) diameter stem castors - locks
provided on front set. 36"
(915 mm) work surface height.
DOOR
• Stainless steel exterior with white
aluminum liner to match cabinet interior.
• Door fi tted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to ensure
permanent attachment.
• Positive seal self-closing door with 90°
stay open feature. Door swings within
cabinet dimensions.
• Magnetic door gasket of one piece
construction, removable without tools for
ease of cleaning.
SHELVING
• Two (2) adjustable, heavy duty PVC
coated wire shelves 23
1
/4"L x 16"D
(591 mm x 407 mm). Four (4) chrome
plated shelf clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on
1
/2" (13 mm) increments.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/fl anged legs.
❒ 2
1
/2" (64 mm) seismic/fl anged legs.
❒ Barrel locks (factory installed).
❒ Basic overshelf.
❒ Single utility shelf.
❒ Double utility shelf.
❒ 28
1
/4" (718 mm) deep,
1
/2" (13 mm)
thick, white polyethylene cutting board.
Requires ”L” brackets.
❒ 28
1
/4" (718 mm) deep,
1
/2" (13 mm) thick,
composite cutting board. Requires
“L” brackets.
❒ Heavy duty, 16 gauge tops.
❒ Exterior rectangular digital thermometer
(factory installed).
❒ ADA compliant models with 34"
(864 mm) work surface height.
❒ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve
and requires R404A refrigerant), consult
factory technical service department for
BTU information.
115/60/1
NEMA-5-15R
ELEVATION
RIGHT VIEW
24
27
/32"
(632 mm)
28
3
/32"
(714 mm)
1"
(26 mm)
Worktop:
Solid Door Refrigerator
1
31
/32"
(50 mm)
3
9
/16"
(91 mm)
12
5
/8"
(321 mm)
7
5
/16"
(186 mm)
27
9
/16"
(701 mm)
29
3
/4"
(756 mm)
39
1
/2"
(1004 mm)
6
3
/16"
(158 mm)
35
15
/16"
(913 mm)
2
5
/16"
(59 mm)
To Previous Page
Loading...
