Truefitness.com / 800.426.6570 / 636.272.7100
19
CHAPTER 2: ASSEMBLY INSTRUCTIONS
BIKE ASSEMBLY STEPS
(continued):
Step #11 Storage Tray:
Step #12 Console Covers:
a) Attach the Front C
Mast using a single (X
sure the Front Cover (
Storage Tray plastic.
b) Align the Back
Cov
Cover (P13) so that th
attach it to the Consol
two (X47; short) scre
c) Attach the Back
Co
Cover (P13) using tw
Attach the Back Cove
using the remaining (
2 M5 x 20 Screws
06; medium) screw; make
P13) aligns with the
er (P22) with the Front
e plastic fits together and
e Mounting Plate using
ws.
ver (P22) to the Front
o (X05; long) screws.
r (P22) to the Front Mast
X06; medium) screw.
2 M5 x 10 Screws
2 M5 x 15 Screws
a) Insert the Storage Tray on top of the Front
Mast Mounting Plate; pay special attention to
make sure that the plastic lip of the Storage
Tray is tucked underneath the bottom of the
Console
b) Attach the Storage Tray to the Mounting
Plate by tightening all 4 screws with a Phillips
head screwdriver (not provided)
Hardware Required:
4 M5 x 8 Screws
To Next Page
Loading...
