TrueCut TrueCut360 User Manual

Instructions
Before You Cut! (Blade Cover)
Adjusting The Circle Size
Safety Lock
The blade comes with a blade
cover installed. Instructions on
the back will show you how to
remove the blade cover when
you are ready to begin cutting.
Keep the cover, as you will
need it if you want to replace
the blade cartridge.
Warning: Always make sure
the blade cover is on before
removing or replacing the
blade cartridge.
The clear plastic safety lock can be slid to the Lock or Unlock
position. When it is in the Lock position, the blade will not be
able to come all the way down to cut. Slide the safety lock to
the Unlock position to cut.
Thank you for purchasing the TrueCut 360°! We know it will be a fun and e ective way to get the perfect circles you
need for your projects. These instructions will help you get started, and teach you about the important features of the
TrueCut 360°. It is recommended you keep these instructions handy and refer to them when needed.
1. Unlock the sizing knob by rotating
its base counter-clockwise, until the
knob can slide freely.
3. Lock the sizing knob in place by
rotating its base clockwise until tight.
2. Slide the knob up or down the cutter to
the desired length. The red line underneath
the knob indicates the circle size.
1-800-264-0644 www.graceframe.com
Blade Cover
Blade Cartridge
Sizing Knob Sizing Knob

TrueCut TrueCut360 Specifications

General

Brand	TrueCut
Model	TrueCut360
Category	Power Tool
Language	English

Summary

Getting Started with TrueCut 360

Blade Cover Safety

Details the importance of the blade cover for safety and when to use it.

Safety Lock Operation

Explains how to use the safety lock to prevent accidental blade exposure.

Adjusting The Circle Size

Unlock Sizing Knob

Instructions on how to unlock the sizing knob for adjustment.

Set Desired Circle Size

Guidance on sliding the knob to the correct position to set circle size.

Lock Sizing Knob

Steps to lock the sizing knob securely after adjustment.

Cutting Circles

Smooth Cutting Motion

Tips for achieving perfect circles with a single, smooth cutting motion.

Hand Placement for Cutting

Guidance on proper hand placement for stable and controlled circle cutting.

Applying Pressure and Rotation

Instructions on applying pressure and rotating for a complete circle cut.

Changing The Blade

Blade Removal Process

Steps for safely removing the old blade cartridge from the TrueCut 360°.

Installing New Blade

Instructions for correctly inserting a new blade cartridge until it clicks.