Unpacking your treadmill
You will need: A philips head screwdriver and a pair of scissors
When your Trueform box arrives, it
should be on a wooden pallet with a
cardboard box over the top of it.
Unscrew the 6 screws (3 on each
side) holding cardboard box in place
Remove cardboard
Use the t-handle with the square bit
(found in the toolbox) to unscrew the
screws on the wooden block at the
front of your treadmill.
Remove the wooden block from the
pallet.
01 02
05
Remove the styrofoam, and toolbox.
Set aside the toolbox for later.
0403
06
06
TRUEFORM RUNNER
To Next Page
Loading...