Truma C30 - Control Panel Operations; Turning the Appliance On;Off

10
Control panel Single Zone
(C30 / C36 / C44 / C60 / C73 / C105)
1 2 3 4 5 6 7
Turbo
Fig. 2
Control panel Dual Zone
(C69 DZ / C96 DZ)
1 2 3 4 5 6 7
Turbo
Fig. 3
1 Power switch
2 Turbo switch
3 Power indicator / Fault light
4 Turbo indicator light
5 LED-Display
6 Switch compartments / Mode
7 Temperature settings
Turning the appliance on/off
• Plug in the AC or the DC power cable. If
the appliance does not start automatically,
press the power switch to turn on the ap-
pliance. The LED display on the control
panel will turn on and the interior tempera-
ture is displayed.
• Press the power switch for three seconds
to switch off the appliance.
The system will remember the previous
settings when power is off. If the power
supply is cut off or disconnected, the appli-
ance will switch off automatically and once
the power supply is restored it will automati-
cally switch back on.