Truma C30 - Fault Indicator

To Next Page

To Previous Page

Fault indicator

Please note that the fault indicator will always be green if normal. When flashing, it will

change to orange color.

Error code

(Display)

Number of

flashes (every

4seconds)

Cause Descripton / Solution

E0 - Broken temperature

sensor

• When the LED display will show

E0, means NTC (the temperature

sensor) broken circuit or short

circuit. Please contact the Truma

Service Center for support.

E1 1

Low voltage

Battery discharge

protection has been

triggered

• Try on different power source

(vehicle or 100V-240VAC

connector). If changing power

source fixed issue, then possible

issue with original power source.

• Ensure cabling between ap-

pliance and battery is at least

1.5mm² (AWG15), if the dis-

tance is more than 2 meters use

at least 2.5mm (AWG13) cable.

• Reduce battery discharge protec-

tion (e.g. ME or LO)