Need help?Do you have a question about the Truma Combi and is the answer not in the manual?
General| Type | Combination heater |
|---|---|
| Fuel | LPG |
| Water capacity | 10 liters |
| Control | Digital control panel |
| Safety Features | Overheat protection, flame monitoring |
| Efficiency | Up to 90% |
Defines approved uses (caravans, motor caravans) and prohibited uses (coaches, boats, cabins) for the appliance.
Only qualified experts may install, repair, and test Truma products. Follow all instructions carefully.
Immediate actions for gas leaks: extinguish ignition sources, ventilate, evacuate, close gas supply, and seek expert inspection.
Warnings about electrical shock, explosion, and cut injuries. Use protective gear and ensure a safe environment.
Operator responsible for water quality; owner for correct operation and affixing warning stickers. Comply with regulations.
The Combi lacks built-in frost protection. Operator must protect against freezing water to prevent serious damage.
Use upright gas cylinders, ensure correct gas pressure, and use national-regulation-compliant hoses.
Includes start-up fumes, low-temp operation, hot air/water hazards, child/disabled use, and exhaust duct checks.
Requires safety shut-off devices per UN ECE R 122. Close gas cylinder when driving if no device is fitted.
Do not use LP gas appliances during refuelling, in car parks, garages, or on ferries.
Addresses issues like slow heating, water leaks, draining problems, and FrostControl activation, with expert repair advice.
Expert required for repairs and cleaning. User cleans compartment and operates safety/drain valve regularly.
Use suitable products, avoid chlorine, and periodically heat water to 70°C to combat microorganisms.
Details warm-air heating and hot water functions for Combi, including gas and hot water modes.
Details warm-air heating and hot water functions for Combi E, including gas, electric, and mixed modes.
Flush water supply before first use. Ensure appliance materials are safe for drinking water.
Explains the role of the external room temperature sensor (2) in measuring vehicle interior temperature for heating control.
Details manual operation (opening/closing) and automatic draining of FrostControl and standard safety/drain valves.
Step-by-step guide for filling the boiler, with notes on FrostControl, water pressure, and initial flushing.
Procedure for draining the boiler, especially during frosty periods, to prevent damage and avoid warranty claims.
Covers initial checks, operation, and shutdown procedures, including frost precautions and long-term storage.
User and expert maintenance, cleaning, and notes on connecting solar systems with electrical protection.
Details 12V and 230V fuses, their locations, replacement, and safety precautions for electrical systems.
Details overheating protection reset, 12V/230V power consumption for various models.
Provides appliance weight, physical dimensions, and protection class (IP 21) ratings.
Covers appliance disposal regulations and lists technical data like gas type, water capacity, and heat output.
References control panel instructions for heater faults and provides a guide for water supply troubleshooting.
Details Truma CP plus, iNet Box, and CP classic panels, including their features and connectivity.
Describes the heating element for FrostControl and other accessories like control panel cables.
Covers warranty applicability, duration, exclusions, and the procedure for making a claim with Truma.
Provides contact details for Truma Service Centre and authorised partners, and information needed for troubleshooting.
To Next Page
