Truma Cooler C60 - Temperature and Unit Settings; Battery Protection and Bluetooth; Power and Override Options

6
Temperature setting
Temperature setting range –22°C to +10°C
(-8 °F to + 50°F) in each compartment
• Press the “switch compartments / mode”
button and use the “temperature set-
tings” buttons to increase or decrease the
temperature.
• Press the “Switch compartments / Mode”
button again to change the temperature set-
ting in the second compartments (only Dual
zone models).
• Press the “turbo switch” button for Turbo
mode to increase the speed of the compres-
sor. This setting can be used when you need
to cool products quicker.
Temperature unit setting
• Press the “Switch compartments / Mode”
button two times to switch between °F / °C
for single zone models and three times for
dual zone models. °F or °C will be shown at
the display. Then press the “temperature set-
tings” buttons to change.
• For the dual zone model, press “+” for three
seconds, and you can switch off the cooling
function of the compartment on the left. Also
press “-” for three seconds, you can switch
off the cooling function of the compartment
on the right. Press the same button again for
three seconds to re-start refrigeration in the
corresponding compartment.
Battery protect voltage setting
• Press the “Switch compartments / Mode”
button one more time after change °F or °C,
to enter battery protect voltage setting. Then
press the “temperature settings” buttons to
choose HI, MED or LO of protect level.
Battery
protect
level:
On
(12 V)
Off
(12 V)
On
(24 V)
Off
(24 V)
LO 11.1 ±
0.3 V
10.1 ±
0.3 V
23.3 ±
0.3 V
21.5 ±
0.3 V
MED 12.2 ±
0.3 V
11.4 ±
0.3 V
25.3 ±
0.3 V
24.1 ±
0.3 V
HI 12.6 ±
0.3 V
11.8 ±
0.3 V
26.2 ±
0.3 V
24.6 ±
0.3 V
Bluetooth setting
• Press the “Switch compartments / Mode”
button one more time after battery protect
voltage setting, to enter Bluetooth activity.
Then press “temperature settings” buttons
to choose ON or OFF.
• Press the “Switch compartments / Mode”
button and “+” button for three seconds, at
the same time to enter the Bluetooth mode.
CLO Connect to the refrigerator by scan the
QR code only.
OPE Scan and find your refrigerator by mo-
bile Bluetooth, and then connect.
Multi voltage system /
Emergency Override
AC/DC, USB connection, fuse and
emergency override in front
emergency
override
AC 100-240V DC 12V/24V
normal
use
Fig. 4