EasyManua.ls Logo

Truma Cooler C60 - Unusual Noise; Fault Indicator Codes

Truma Cooler C60
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Unusual noise when refrigerator is working
The refrigerator is not placed on a level surface
If none of the above solves your issue please contact the Truma Service Center (855-558-7862).
Fault indicator
Please note that the fault indicator will always be green if normal. When flashing, it will
change to orange color.
Errorcode
(App)
Number of flash-
es
(every 4 seconds)
Fault Descripton / Solution
ER 0 - Broken temperature
sensor
When the LED display will show E0,
means NTC (the temperature sen-
sor) broken circuit or short circuit.
Please contact the Truma Service
Center for support.
ER 1 1
Low voltage
Try on different power source (ve-
hicle or 240VAC power). If chang-
ing power source fixed issue, then
possible issue with original power
source.
Ensure cabling between appliance
and battery is at least 1.5mm²
(AWG15), if the distance is more
than 2 meters use at least 2.5mm
(AWG13) cable.
ER 2 2
Fan issue
Fan is drawing too many amps (over
0.6 amps).
ER 3 3
Compressor start issue
Unplug cable and allow appliance to
rest for 10 minutes.
Try on different power source (ve-
hicle or 240VAC power).
Electronic box fault.
ER 4 4
Low motor speed
Reduce products/items inside
appliance.
Move so appliance is in a lower am-
bient temperature, clean vents/en-
sure clear air flow over compressor.
ER 5 5
Over temperature
Move so appliance is in a lower am-
bient temperature.
Clean vents/ensure clear air flow
over compressor.
If these measures do not remedy the malfunction, contact your dealership, Truma Service or one of
our authorized Service Partners.

Related product manuals