To Next PageTo Next Page
Need help?Do you have a question about the Truma DLE60C and is the answer not in the manual?
General| Energy source | Gas |
|---|---|
| Ignition | Electronic |
| Power Supply | 12 V |
| Gas Consumption | 0.6 kg/h |
| Heat-up Time (15°C to 70°C) | 20 minutes |
| Power Output | 6 kW |
| Fuel Consumption | 60 g/h (Butane), 70 g/h (Propane) |
| Operating Temperature Range | 0°C to 60°C |
Essential warnings regarding fire, explosion, and gas handling.
Step-by-step actions to take if a gas leak is detected.
Explanation of hazard symbols and their meanings for user safety.
Guidelines for safe operation and interaction with the appliance.
Step-by-step guide for filling, starting, and operating the water heater.
Instructions for operating and preparing the appliance during cold weather.
Crucial rules for using the appliance safely, including hot water warnings.
Procedures for safely addressing operational issues and potential damages.
Guidelines for performing maintenance and repairs safely and correctly.
Warnings and guidelines regarding the safe use and maintenance of the relief valve.
Safety warnings and critical inspections before powering on the water heater.
Detailed steps for powering on the Truma AquaGo unit.
Procedures for correctly powering down the water heater.
Precautions and requirements for operating in freezing conditions.
Steps to prepare the appliance for storage during winter to prevent freezing.
Advice on annual servicing by certified technicians and safety during repairs.
Step-by-step guide to drain water and clean the inlet filter.
Crucial safety notices regarding decalcification agents and contact.
Potential causes and resolutions for lack of hot water or unusual noises.
Troubleshooting steps for insufficient hot water temperature.
Diagnosing and fixing water leaks from the pressure relief valve or inlet filter.
Essential safety rules and precautions for installers.
Guidelines for installing the appliance in recreational vehicles.
Warnings and precautions regarding exhaust gas management during installation.
Critical safety warnings related to improper gas connection installation.
Instructions for making safe and compliant electrical connections.
Procedures for safely detecting gas leaks at all connections.
