4
Before starting to use the device, it is essential that
the Operating Instructions and “Safety instructions” be
read carefully. The vehicle owner is responsible for ensuring
that the device can be operated in the proper manner.
Remote control
The symbols shown on the display become visible
depending on the setting.
Operating instructions
Sleep function
(cooling mode only)
Ultra-quiet fan
Set-up button
Pairing the remote control
and IR receiver
Mode
Operating mode selection button
– Cooling
– Heating
– Automatic
– Circulated air
Temperature selection buttons
16 – 31 °C
In 1°C increments
On / o switch
Reset
Restores the remote control
to its factory settings.
.
Fan level
– Low
– Medium
– High
Resend
Retransmit data
Clock time
selection button
Time setting
Setting for clock time and timer
Timer selection buttons
Switch-on or switch-o time
can be set up to 24 hours in advance
Timer
On / o time
Cooling
Setup
Heating
Resend /
data transmission
Circulated air
Fan level
Sleep function
Temperature
Clock time
Automatic mode
To Next Page
Loading...
