29
Cleaning and Maintaining the MC-1000 Cont.
Follow these instructions as needed to keep your chair clean and well maintained
Cleaning Plastic Components:
• Use a weak, natural solution to clean plastic components. Always wring out your
cleaning cloth before applying to dirty parts.
• Wipe down the part with a clean, damp cloth to remove any remaining cleaning
solution.
• Allow the part to dry.
Cleaning the Remote Control
• Use an electronics cleaning cloth to wipe any dust from the surface. If the surface
requires deep cleaning, use a so, damp cloth.
• Allow the control to dry completely before using. Note: Do not use alcohol, diluent,
or propellant to clean the surface.
A Note on Cleaning: Always take the time to unplug your chair
from the wall outlet with dry hands before engaging in any
cleaning activities. Only use dry hands to reconnect the plug
aer cleaning. Failing to take the appropriate measures during
cleaning activities could lead to electrocution or burn injuries.
CLEANING AND MAINTENANCE
To Next Page
Loading...
