Why tilt cannot be adjusted by more than 10° on unlocked Trumpf TruSystem 7000 Medical Equipment?
If the tilt cannot be adjusted by more than 10° when the Trumpf Medical Equipment operating table is unlocked (no brakes applied), lock the operating table. Tilting is blocked in drive mode for safety reasons.
General| Brand | Trumpf |
|---|---|
| Model | TruSystem 7000 |
| Category | Medical Equipment |
| Language | English |
Explanation of keywords and symbols used in safety information.
General safety guidance for operating personnel and patients.
Covers general handling, setup, and usage of the operating table.
Warnings for improper attachment and damaged product hazards.
Safety measures related to electricity, power supply, and wiring.
Safety concerning power cables, bonding cables, and potential damage.
Safety precautions when using HF surgery devices and defibrillators.
Safety considerations for using and attaching the operating table pad.
Safety instructions for moving and repositioning the operating table.
Safety warnings regarding collisions and entrapment during adjustments.
Safety guidelines related to maintenance and repair procedures.
Guidelines for preventing infection during use and maintenance.
Information on environmentally friendly disposal and material handling.
Explanation of pictograms and labels on the operating table.
Guidance on reading the manual and definitions of terms.
Information on the intended use and limitations of the operating table.
Description of the device's main operational characteristic.
Step-by-step instructions for unboxing and setting up the operating table.
Details and features of the two-part table top configuration.
Identification of various parts and components of the operating table.
Details and features of the one-part table top configuration.
Explanation of the information presented on the product's model plate.
Description of audible signals and their meanings.
Lists the approved pad versions for the operating table tops.
Instructions for installing and removing the operating table pads.
Description of the column keypad and its primary functions.
Detailed mapping of functions to keys on the column keypad.
Explanation of the various optical indicators and their states.
Details and functions of the TruSystem 7000 wired remote control.
Details and functions of the TruSystem 7500 wireless remote control.
How other medical or non-medical devices can cause malfunctions.
Information on the internal lithium-ion batteries and their capacity.
Connecting the operating table to the mains power supply.
Step-by-step instructions for connecting the operating table to power.
Instructions for safely disconnecting the operating table from power.
Procedure for charging the operating table's battery.
Steps for connecting the equipotential bonding cable.
Procedure for switching the operating table on.
Procedure for switching the operating table off.
Instructions for resetting the operating table in case of unexpected behavior.
Explanation of what coupling points are and their purpose.
Overview of different types of coupling points and fixtures.
Details on attaching accessories to side rails using clamps.
Locations of coupling points on the two-part table top.
Locations of coupling points on the one-part table top.
How to use the table as an extension and applicable restrictions.
Procedure for attaching section segments without additional locking.
Procedure for attaching section segments with a release button.
Procedure for attaching section segments with a release handle.
Procedure for detaching section segments from the table top.
Steps for attaching accessories to the side rails of the table.
Steps for safely removing accessories from the side rails.
Information on radiolucent areas and rails for X-ray cassettes.
Guidelines for correctly positioning the patient on the table.
Guidelines for positioning the patient in the inverse orientation.
General warnings and permissible load limits for the table.
How overload is detected, indicated, and protected.
Load capacities for various two-part table top configurations.
Load capacities for various one-part table top configurations.
Maximum permitted torque values for the side rails.
Formula and table for calculating torque on side rails.
General steps for adjusting the operating table functions.
Safety measures to prevent collisions during table movements.
Procedure for releasing and locking the column keypad.
How to select and match the patient's head position.
Procedure for setting the operating table to a level position.
How to tilt the operating table top left or right.
How to incline the operating table top towards head or foot.
How to raise or lower the entire operating table top.
How to move the table top towards the foot or head end.
Instructions for adjusting the leg section joints.
Instructions for adjusting the back section joints.
How to achieve Flex and Reflex positions using the remote control.
Settings configurable via PC and the Trumpf Medical Software Service Interface.
Overview of functions related to the operating table's running gear.
Steps required before unlocking, rotating, and moving the table.
Procedure for releasing the operating table's brake.
Enabling free movement of the operating table wheels.
Using assistance for directional movement and turning the table.
Operation of the traction drive for MB/MBW table versions.
Procedure for locking the operating table using braking jacks.
Manual procedure for releasing the running gear in emergencies.
How to manually activate the emergency mode on the operating table.
General procedures for cleaning and disinfecting the operating table.
Guidelines for using specific disinfectants and cleaning agents.
Environmental requirements for operating table storage and transport.
Technical specifications including dimensions, weight, and power.
Adjustment ranges, classifications, and protection levels.
Details on approved cables and policies for repairs.
Table of common errors, their possible causes, and corrections.
Handling of specific issues like tilt, unlock, or leg section adjustments.
Guidelines for service intervals and recommendations for maintenance contracts.
Instructions for environmentally friendly disposal of the table and its components.
Guidelines for emitted electromagnetic interference.
Guidelines for immunity to power supply variations and magnetic fields.
Guidelines for immunity to RF fields and recommended protection ratios.
Recommended separation distances for RF telecommunication equipment.
Information on ordering section segments and accessories.
FCC and Industry Canada identification details for the MBW version.
ANRT and TRA registration details for Morocco and UAE.
To Next Page
