What to do if the BATTERY STATUS indicator flashes and there is no function when pressing a key on my Trumpf Medical Equipment?
If the BATTERY STATUS indicator on the column keypad of your Trumpf Medical Equipment flashes and there's no function when pressing a key, it means the operating table is discharged. To fix this, operate and charge the operating table using the mains power cable.
Why Trumpf TruSystem 7500 Medical Equipment operating table cannot be switched on?
If your Trumpf Medical Equipment operating table cannot be switched on, it may be discharged. Operate and charge the operating table with the mains power cable.
Why (Reverse) Trendelenburg position cannot be fully attained on Trumpf TruSystem 7500 Medical Equipment?
If the (Reverse) Trendelenburg position cannot be fully attained on your Trumpf Medical Equipment, the tilt angle setting may be too high. Reduce the tilt to resolve this.
Why tilt position cannot be fully attained on Trumpf Medical Equipment?
If the tilt position cannot be fully attained on your Trumpf Medical Equipment, the (reverse) Trendelenburg angle setting may be too high. Try reducing the (reverse) Trendelenburg setting.
Why leg sections cannot be adjusted far enough down on Trumpf Medical Equipment?
If the leg sections on your Trumpf Medical Equipment cannot be adjusted far enough down, the longitudinal travel might be too far toward the head end. Adjust the longitudinal travel toward the foot end.
Why back section cannot be adjusted far enough down on Trumpf Medical Equipment?
If the back section on your Trumpf Medical Equipment cannot be adjusted far enough down, the longitudinal travel might be too far toward the foot end. Adjust the longitudinal travel toward the head end.
General| Tabletop length | 2150 mm (84.6 in) |
|---|---|
| Tabletop width | 550 mm (21.7 in) |
| Lateral tilt | ± 20° |
| Trendelenburg / Reverse Trendelenburg | ± 45° / 30° |
| Battery Backup | Yes |
| Application | Operating table |
| Device Type | Operating table |
| Power Source | Mains |
| Control Interface | Hand control |
| Compatibility | Compatible with various accessories |
Defines the intended use of the operating table column and emphasizes trained personnel operation.
Lists restrictions and warnings for operating table use, including load limits and improper use.
Specifies authorized remote controls and shuttles for use with the operating table column.
Details safety measures to protect users and patients from dangers during operation.
Covers reading instructions, using defined products, observing technical data, and trained staff operation.
Provides guidelines for electrical safety, including power connection and equipotential bonding.
Addresses the use of high-frequency surgical equipment and defibrillators with the operating table.
Outlines safety procedures for using the operating table column in an MRI environment.
Specifies procedures for maintenance, repair, and documentation of the operating table.
Details rules for cleaning and disinfection, emphasizing hygiene regulations.
Guidance on disposal of cleaning materials, batteries, and product disposal.
Defines symbols and keywords used in the manual to indicate danger levels.
Describes the medical device's ability to maintain its set position without user intervention.
States the expected service life of Trumpf Medical products and associated warranty.
Describes the mobile operating table column, its transport on a shuttle, and battery operation.
Details the fixed installation column with internal power supply, its rotation, and emergency power.
Describes the fixed installation column without internal power, its rotation, and external power unit.
Illustrates and explains various labels found on the mobile and fixed installation operating table columns.
Lists audible signals and their corresponding actions or statuses for the operating table.
Discusses how external RF devices can interfere with the operating table's function.
Provides an overview of the column keypad, its functions, and visual indicators.
Details the operation and functions of the column keypad, including key release and two-key control.
Explains the meaning and status of various visual indicators on the column keypad.
Describes the functions of the TruSystem 7500 and 5500 remote controls for operating the table.
Explains the internal power supply using lithium-ion batteries for mobile and fixed columns.
Details connecting the operating table to the mains power supply and safety precautions.
Describes the external power supply for the TruSystem 7500 Hybrid MR model.
Provides instructions for charging the mobile and fixed installation operating table columns.
Instructions for switching off the mobile operating table column, especially when on battery power.
Details that the fixed installation column with internal power remains switched on.
Explains switching off the fixed installation column without internal power supply.
Discusses requirements for integrating the operating table column into a network environment.
Explains external control of the operating table via connected medical devices and displays.
Describes how to release the column keypad lock to operate the table.
Details how to select and match the patient's head position with the column keypad display.
Explains the level position function, which moves the table to a defined starting position.
Describes the tilt function, allowing the tabletop to tilt left or right.
Explains the Trendelenburg and reverse Trendelenburg positions for tilting the tabletop.
Details the lift function, which raises or lowers the entire operating tabletop.
Describes how to rotate the fixed installation column and its brake mechanism.
Outlines procedures for activating and operating the table in emergency mode.
Describes transporting and transferring the operating tabletop with or without a patient on the shuttle.
Step-by-step guide for transferring the operating tabletop from the shuttle to the column.
Instructions for transferring the operating table column from the operating table to the shuttle.
Details transporting the mobile operating table on a shuttle.
Procedure for moving the operating table onto the shuttle.
Instructions for safely setting down the operating table from the shuttle onto the floor.
Describes emergency transfer procedures when leveling is incomplete due to a defective drive.
Provides guidelines for cleaning and disinfecting the operating table column safely.
Notes that the external power supply unit does not require cleaning or disinfection.
Instructions for using the cleaning shuttle to raise and clean the mobile operating table column.
Specifies requirements for temperature, humidity, and air pressure during storage and transport.
Details the operational requirements for temperature, humidity, and air pressure.
Provides technical specifications for mobile and fixed installation operating table columns.
Instructions for switching off and charging the mobile operating table when not in use.
Covers decommissioning procedures for fixed installation columns with and without internal power.
To Next Page
