Need help?Do you have a question about the Truper CEP-12 and is the answer not in the manual?
Maintain a clean, well-lit workspace to prevent accidents and ensure proper operation.
Crucial safety measures for grounding, cords, and avoiding wet conditions to prevent shock.
Stay alert, use PPE, and ensure the tool is off before connecting or carrying.
Use the correct tool, do not force it, and ensure it's in good working order.
Regular maintenance and professional service are vital for tool safety and longevity.
Check extension cords, remove workplace hazards, and ensure blades are tight and balanced.
Hold workpiece firmly, feed smoothly, avoid direct line of operation, and use dust extraction.
Turn off tool before adjustments, never use hands for stuck pieces, replace blades in pairs.
Instructions on securely mounting the planer to a stable, flat, and level surface.
Detailed steps for safely removing, replacing, and installing the cutting blades.
Steps for attaching and securing the anti-chip guard at the rear of the planer.
Guide for adjusting and aligning the front and rear table extensions for proper use.
Procedure to align the cutter head and work table for even thickness planing.
Instructions on using the safety key and switch to power the planer on and off.
Understanding the overload switch and the procedure to restart the motor after tripping.
Regular cleaning of parts, rollers, and cutter head for precision and longevity.
Recommended lubrication for chains, and note on factory-sealed bearings.
Emphasizes that service must be performed by TRUPER authorized personnel.
Maintain a clean, well-lit workspace to prevent accidents and ensure proper operation.
Crucial safety measures for grounding, cords, and avoiding wet conditions to prevent shock.
Stay alert, use PPE, and ensure the tool is off before connecting or carrying.
Use the correct tool, do not force it, and ensure it's in good working order.
Regular maintenance and professional service are vital for tool safety and longevity.
Check extension cords, remove workplace hazards, and ensure blades are tight and balanced.
Hold workpiece firmly, feed smoothly, avoid direct line of operation, and use dust extraction.
Turn off tool before adjustments, never use hands for stuck pieces, replace blades in pairs.
Instructions on securely mounting the planer to a stable, flat, and level surface.
Detailed steps for safely removing, replacing, and installing the cutting blades.
Steps for attaching and securing the anti-chip guard at the rear of the planer.
Guide for adjusting and aligning the front and rear table extensions for proper use.
Procedure to align the cutter head and work table for even thickness planing.
Instructions on using the safety key and switch to power the planer on and off.
Understanding the overload switch and the procedure to restart the motor after tripping.
Regular cleaning of parts, rollers, and cutter head for precision and longevity.
Recommended lubrication for chains, and note on factory-sealed bearings.
Emphasizes that service must be performed by TRUPER authorized personnel.
General| Power | 1600 W |
|---|---|
| Feed rate | 8 m/min |
| Idle speed | 10000 RPM |
| Dust extraction | No |
| AC input voltage | 127 V |
| AC input frequency | 60 Hz |
Weight and Dimensions| Depth | 340 mm |
|---|---|
| Width | 560 mm |
| Height | 400 mm |
| Weight | 31000 g |
| Feed table dimensions (W x D) | 320 x 290 mm |
To Next Page
