Code
Description
Net weight
Motor
Motor rated power
Fuel tank
Speed
Cutting capacity
Axis length
DES-430 DES-520
11031 11032
20.2 lb
Gasoline grass trimmer
0.3 gal
1.7 Hp 2 Hp
9000 RPM
18”
5.2 ft
Cutting systems
Nylon line spool, blade and circular saw (not included)
52 cc43 cc
Technical data
3
Blade diameter
Nylon line diameter
Outer: 10” Inner: 1”
From 0.09” to 0.14” (recommended)
Type of handle
Work cycle
“Bicycle” type
20 minutes rest per each tank consumed.
Maximum 6 hours daily.
ENGLISH
• The grass trimmer has an air-cooled 2-cycle motor using a mix of unleaded gasoline and high quality self-propul-
sion oil for air-cooled two-cycle motors.
• The motor is certified to run with unleaded gasoline for vehicles with 87 or more ([R+M]) octane level.
• Do not use any type of gasoline premixed with oil bought in service stations such as gasoline for motorcycles.
• Do not use automotive oil or oil for 2-cycle outboard motors oil.
• The mix ratio should be 50 parts gasoline per 1 part oil (50:1 ratio). Prepare the mix in a gasoline-approved
container. Always mix thoroughly before pouring in the motor tank.
Do not use fuel mix stored longer than 7 days. Make small amounts of mix.
Never smoke near fuel, the gasoline filling up area or where the oil mix is being prepared or when
operating the tool.
Any attempt to start the grass trimmer with no oil added to the fuel mix will damage to the grass
trimmer.
Fuel specifications
WARNING
CAUTION
WARNING
Mix
1 liter
1L
+ =
50:1
ratio
4 capfuls oil
Gasoline
Use the or ACT- 2T OIL** cap as measure,
mix 4 capfuls oil per each liter gasoline.
A wrong mix may cause the motor to throw a rod causing
expensive repairs!
To prolong the useful life of the motor use two-cycle synthetic motor oil.
* 1 gallon = 3.78 liter ** Not included
To Next Page
Loading...
