Need help?Do you have a question about the Truper SME-10B and is the answer not in the manual?
Details electrical specifications, including voltage, current, power, and extension cord requirements.
Guidelines for maintaining a clean, well-lit, and safe work environment, free from hazards.
Precautions for safe use of electrical tools, including plug compatibility and cord handling.
Essential safety measures for the operator, including alertness, PPE, and preventing unintentional starts.
Critical checks and procedures to follow before powering on the saw.
Information on preventing kickback, a dangerous reaction where the workpiece is thrown.
Safe practices and warnings to follow during the sawing operation.
Extra safety measures, including dust control, hearing protection, and proper assembly.
Instructions for safely unpacking the equipment and checking for damage.
Detailed procedure for installing the blade spacer for specific cutting operations.
Instructions for assembling and correctly positioning the retractable blade guard.
Guidance on connecting the dust suction hose to the guard and chip ejector.
Steps for installing and securing the sawing guide for straight cuts.
Instructions for attaching the auxiliary guide for specific cutting tasks.
How to mount and use the miter gauge for angled cuts.
Procedure for adjusting the saw blade height for optimal cutting depth.
How to adjust the saw blade's bevel angle for angled cuts, from 0° to 45°.
Instructions for attaching and securing table extensions to increase work surface length.
Guidance on unlocking and using the sliding table, often with the miter gauge.
Steps for adjusting the miter gauge for precise angled cuts, including bumper adjustment.
Detailed procedure for safely replacing the saw blade.
How to safely turn the table saw on and off using the main switch.
Explanation of the overload protection switch and how to reset it.
Measures to prevent the saw from starting unexpectedly after a power interruption.
Technique for making cuts perpendicular to the wood grain using the miter gauge.
Method for making cuts parallel to the wood grain using the sawing guide.
Safety procedures for cutting small or narrow pieces using push sticks and auxiliary guides.
Instructions for performing groove cuts by removing the blade spacer.
Guidance on checking and replacing worn carbon brushes.
Information on disc wear, replacement, and proper disc selection.
Details electrical specifications, including voltage, current, power, and extension cord requirements.
Guidelines for maintaining a clean, well-lit, and safe work environment, free from hazards.
Precautions for safe use of electrical tools, including plug compatibility and cord handling.
Essential safety measures for the operator, including alertness, PPE, and preventing unintentional starts.
Critical checks and procedures to follow before powering on the saw.
Information on preventing kickback, a dangerous reaction where the workpiece is thrown.
Safe practices and warnings to follow during the sawing operation.
Extra safety measures, including dust control, hearing protection, and proper assembly.
Instructions for safely unpacking the equipment and checking for damage.
Detailed procedure for installing the blade spacer for specific cutting operations.
Instructions for assembling and correctly positioning the retractable blade guard.
Guidance on connecting the dust suction hose to the guard and chip ejector.
Steps for installing and securing the sawing guide for straight cuts.
Instructions for attaching the auxiliary guide for specific cutting tasks.
How to mount and use the miter gauge for angled cuts.
Procedure for adjusting the saw blade height for optimal cutting depth.
How to adjust the saw blade's bevel angle for angled cuts, from 0° to 45°.
Instructions for attaching and securing table extensions to increase work surface length.
Guidance on unlocking and using the sliding table, often with the miter gauge.
Steps for adjusting the miter gauge for precise angled cuts, including bumper adjustment.
Detailed procedure for safely replacing the saw blade.
How to safely turn the table saw on and off using the main switch.
Explanation of the overload protection switch and how to reset it.
Measures to prevent the saw from starting unexpectedly after a power interruption.
Technique for making cuts perpendicular to the wood grain using the miter gauge.
Method for making cuts parallel to the wood grain using the sawing guide.
Safety procedures for cutting small or narrow pieces using push sticks and auxiliary guides.
Instructions for performing groove cuts by removing the blade spacer.
Guidance on checking and replacing worn carbon brushes.
Information on disc wear, replacement, and proper disc selection.
To Next Page
General
