Trust BT446 - Preparing the Tablet for Use; Inserting Batteries; Installing the Driver; Installing Software Applications

TRUST BT446 WIRELESS BLUETOOTH TABLET
2
1 Preparing the tablet for use
1.1 Inserting the batteries
Note: Inserting the batteries incorrectly will damage the device.
Note: We recommend using two AA 1800 mA rechargeable batteries. See
www.trust.com\battery-chargers for more information.
Note: Only replace the batteries with the same type of AA or AAA alkaline or
rechargeable batteries.
Read the Quick Installation Guide for more information.
2 Installing the driver
Note: This Bluetooth tablet only works with Windows 2003, Windows XP and
Windows 2000.
Note: Before installing the device, make sure a Bluetooth adapter with the HID
(Human Interface Device) profile has been installed.
Note: Install the driver before connecting the tablet.
Note: The latest driver can be downloaded from www.trust.com/14117. Check
whether a new driver is available and use this for the installation.
2.1 Installing the driver
Read the Quick Installation Guide for instructions on how to install the driver.
3 Installing the software
Power Presenter is a program for supporting presentations.
Corel Painter Essentials is a drawing program. The drawing program is on a separate
CD-ROM.
Both programs can be operated with the pressure sensitivity of the tablet or pen.
Note: Make sure all other programs are closed during the installation.
3.1 Power Presenter
1. Insert the Trust installation CD-ROM into the CD-ROM drive.
2. Click ‘ Install Software' and then click 'Power Presenter’.
3. Follow the on-screen instructions.
3.2 Installing Corel Art Dabbler
Note: In the example, the CD-ROM drive is indicated by “D:\”. This is only an
example and may be different for your computer.
1. Insert the CD-ROM into your CD-ROM drive.