Trust BT446 - Using the Tablet; Bluetooth Connectivity and Status; USB Cable Connection

TRUST BT446 WIRELESS BLUETOOTH TABLET
3
UK
a) Select 'Run' from the start menu.
b) Type [D:\English\Setup.exe] to install the program in English,
[D:\German\Setup.exe] to install the program in German or
[D:\French\Setup.exe] to install the program in French.
2. Follow the on-screen instructions.
3. After the files have been installed, click ‘Finish’ to complete the installation
process.
4 Using the tablet
Note: Place the pen in the pen holder when it is not being used.
Note: To save the battery power, turn the tablet off using the On/Off switch.
Note: A photograph or drawing can be placed under the transparent work area.
4.1 Using the tablet with Bluetooth
4.1.1 Icons
There is a status icon in the right-hand corner of the taskbar. See the diagrams at the
beginning of the instruction manual.
Figure Function
4 The tablet has been connected with
the USB cable.
5 The batteries are full.
6 The batteries are 3/4 full.
7 The batteries are 1/2 full.
8 The batteries are almost empty.
4.1.2 Indicators
Colour Indicator Function
Flashing The tablet is connected, the pen is out
of range.
Blue
Continuous The pen is within the range of the
tablet.
Red Continuous The batteries are almost empty.
4.1.3 Disconnecting
Press the Disconnect button for at least 4 seconds to disconnect the tablet. The blue
indicator will then go out.
4.2 Using the tablet with a USB cable
The tablet can also be used with the USB cable provided. This will save the battery
power. Use is the same as with Bluetooth. If the cable is too short, it can be extended
using a USB extension cable. The software must already be installed.
1. Turn the tablet off.
2. Use the USB cable to connect the tablet to the computer.
3. Restart the PC if the USB cable is being used for the first time.