Trust GXT 148 - Macro and Profile Management; Macro Creation and Recording Process; Profile Selection and Custom Setup; Restoring Default Device Settings

GXT 148 Gaming Mouse - USER’S MANUAL
4
Macro Settings
8.
a
b
c
Create a macro (Store a sequence of keys in the software)
- Click on the button witch you want to re-assign.
- Hover over ‘Assign Macro’.
- Click on ‘Macro Manager’.
- Create an new macro by clicking on ‘New’.
- Enter the name of the new macro.
9.
a
b
c
Record a macro
- Select a created macro.
- Click on the ‘start record’ button to start recording the prefered keyboard sequence.
- When you’re finished creating your macro. Click the ‘stop record’ button.
- Close the ‘macro manager’ by clicking on ‘OK’.
10.
Assign a macro
- To assign a macro follow steps 8 a/b and choose the prefered macro from the function list.
- Click on ‘Apply’  The mouse is being updated.
Profile Settings
11.
a
Select a profile
- Select one of the 5 profiles bij clicking on the prefered profile.
12.
a
b
Save or Load a custom setup
- Click on ‘Save Profile’ to save a setup or ‘Load File’ to load a setup.
- Enter a name for the mouse setup, or choose the prefered profile to load.
- Click on ‘Save/Open’.
- Your mouse setup is now saved/loaded.
13.
a
b
Restore default settings
- Go to ‘Advanced settings’.
- Click on ‘Reset’ to reset all profiles to factory default.
- Click on ‘OK’ to reset all settings.
- Click on ‘Apply’  The mouse is being updated.