23
13. Connect a new device
If you already control your Trust Smart Home
receiver with a remote control or wall switch
continue to step 14. (Only for Startline products)
A
Put your receiver in connect/learn mode. (Read
the manual of the receiver on how to put it in
connect/learn mode).
B
When the receiver is in connect/learn mode
press CONNECT.
The receiver will go on and o twice to
acknowledge the connection.
C
The device is now added to your room. You
can now control the device with the App.
D
Use the buttons to control the device.
1 sec.
A
A
B
C
D
To Next Page
Loading...
Need help?
General
