Secure Web Gateway 11.5 Setup Guide
Copyright © 2013 Trustwave Holdings, Inc. All rights reserved. 28
4. Create a working directory, unzip the files, and run SETUP to install the program.
5. From the Trustwave Support website section, copy the SWG Installation Utility files and the ISO into
the working directory.
6. Unzip the SWG Installation Utility files to the working directory.
7. Insert a USB key and run the USB Key Creator program from its saved location.
8. Choose the USB key drive letter and browse to the working directory.
Make sure that you have selected the correct drive letter!
9. Click CREATE for the program to format the USB key and copy the necessary files.
10. When complete, the USB key is ready to use for the SWG Installation/upgrade. For more information,
refer to SWG Installation Utility on page 22.
To Next Page