3
This device allows you to monitor speed of axis motion and to compare this
value to two setpoints you can pre-program according to your needs. Every
setup setting and work parameter are stored in EEPROM module to guarantee
reliability and working assurance.
This manual provides all the necessary information for a correct installation and use of this device; it is strictly
recommended to read carefully the following instructions.
Entity Elettronica does not assume any responsibility for injuries or damages for persons or things deriving from non-
compliance with the instructions in this manual; It does not assume any responsibility for eventual inaccuracy and
reserves the right to modify partially or totally the device features and documentation.
Technical data in this manual include a tolerance of +/- 10%.
Version Changes Date of changes
0 New Operating Manual; October 1997
1 Aesthetic and text changes; March 2001
2 New keyboard images; text structure remake. November 2002