TScale AHC Series - Page 20

AHC/QHC series technical manual
- 20 -
The 6. package shows the accumulated values in the memory and the loaded scale
The 7. package shows the accumulated values in the memory and the empty scale.
Now the software sends the command MC to clear the memory.
The 8. package shows the empty scale with a clear memory.
1.[RX]
ST,GS, 0.0000,kg<CR><LF>
TARE 0.0000,kg<CR><LF>
U.W. 86.9018 g<CR><LF>
PCS 0pcs<CR><LF>
T.NO. 0<CR><LF>
T.WGT. 0.0000,kg <CR><LF>
T.PCS. 0pcs <CR><LF>
<CR><LF>
<CR><LF>
2.[RX]
ST,GS, 1.7380,kg<CR><LF>
TARE 0.0000,kg<CR><LF>
U.W. 86.9018 g<CR><LF>
PCS 20pcs<CR><LF>
T.NO. 0<CR><LF>
T.WGT. 0.0000,kg <CR><LF>
T.PCS. 0pcs <CR><LF>
<CR><LF>
<CR><LF>
[TX]
M+<CR><LF>
3.[RX]
ST,GS, 1.7380,kg<CR><LF>
TARE 0.0000,kg<CR><LF>
U.W. 86.9018 g<CR><LF>
PCS 20pcs<CR><LF>
T.NO. 1<CR><LF>
T.WGT. 1.7380,kg <CR><LF>
T.PCS. 20pcs <CR><LF>
<CR><LF>
<CR><LF>
4.[RX]
ST,GS, 0.0000,kg<CR><LF>
TARE 0.0000,kg<CR><LF>
U.W. 86.9018 g<CR><LF>
PCS 0pcs<CR><LF>
T.NO. 1<CR><LF>
T.WGT. 1.7380,kg <CR><LF>
T.PCS. 20pcs <CR><LF>