To Next PageTo Next Page
Need help?Do you have a question about the TSI Incorporated aerotrak 9306-V2 and is the answer not in the manual?
General| Light Source | Laser Diode |
|---|---|
| Vacuum Source | Internal pump |
| Flow Rate | 2.83 L/min (0.1 cfm) |
| Channel Sizes | 0.3, 0.5, 1.0, 5.0, 10.0 µm |
| Power Supply | Rechargeable battery or AC adapter |
| Communication Interface | USB |
| Counting Efficiency | 50% at 0.3 µm |
| Zero Count | ≤1 count in 5 minutes |
| Audible Alarm | Adjustable |
| Exhaust | Filtered |
| Battery | Li-ion |
| Operating Temperature | 10 ° to 40 °C |
| Storage Temperature | -10 ° to 50 °C |
| Operating Humidity | 0 to 90% RH, non-condensing |
Details the terms and conditions of the product warranty and seller's liability.
Provides crucial safety guidelines regarding the instrument's laser system.
Explains the meaning of various caution and warning symbols used in the manual and on the instrument.
Guide on how to carefully unpack the instrument and verify all included parts.
Lists and describes available optional accessories for the particle counter.
Overview of the Model 9306 particle counter's features and components.
Instructions on how to use the integrated stand and the provided stylus for operation.
Details on powering the instrument using a lithium-ion battery or AC power.
Step-by-step instructions for performing a zero check to ensure instrument accuracy.
Guide on how to properly install the isokinetic inlet onto the instrument.
Instructions for connecting and installing the optional temperature/RH probe.
Describes the main screens (tabs) and their general layout and functions.
Explains the on-screen keyboard used for data entry and navigation.
Details the information displayed on the main operational screen of the instrument.
Describes the detailed view of particle count and size data on the display.
Overview of the various setup options available for configuring the instrument.
Explains how to preview collected data, export, and print sample records.
Guide on selecting and generating standard reports based on collected data.
Instructions for downloading stored data from the instrument to a USB drive.
How to connect the instrument to a PC via USB for data transfer.
Information on installing the necessary software for data management.
Details on using the Ethernet port for communication with monitoring software.
Recommended schedule for field and factory maintenance tasks.
Step-by-step instructions for performing a zero check to ensure instrument accuracy.
Instructions on how to clean the exterior of the particle counter.
Information on how to contact TSI for technical and application support.
Procedures and information required for sending the instrument for service or repair.
Detailed specifications for the optional temperature and relative humidity probe.
Lists the CE and RoHS compliance standards met by the instrument.
Visual representation of the instrument's dimensions with key measurements.
