Firmware Commands B-3
RTO Read Time On
This command reports the instruments power-on time.
Command: RTO Read on-time command
Response: hhhh:mm hhhh number of on-time hours
mm number of on-time minutes
Example: RTO Read power on time
Response: 456:40 456 hours and 40 minutes
RV Read Version
This command returns the instruments Model number, firmware revision and its
serial number.
Command: RV Read Version command
Response: Model 3876 Ver v.vv S/N nnnn
v.vv ranges 0.01 to 9.99 (3 digits)
nnnn ranges 100 to 99999999
Example: RV Read Version
Response: Model 3876 Ver 2.01 S/N 12453348
To Next Page
Loading...
