TSI Instruments 3786 - Page 78

I-2 Model 3786 Ultrafine Water-based Condensation Particle Counter
M–N–O
maintenance, 5-1
manual
copyright, iii
history, ii
part number, iii
purpose, xiii
related product, xiii
minicom, 4-4
Model 3007 manual, xiii
Model 3010 manual, xiii
Model 3022A manual, xiii
Model 3025A manual, xiii
Model 3760A/3762 manual, xiii
Model 3782 manual, xiii
Model 3785 manual, xiii
Model 3786
components, 2-1
concentration calculations, 1-5
connecting power, 2-4
draining, 2-7
flow diagram, 1-4
how it works, 1-3
maintenance, 5-1
overview, 1-1
priming, 2-4
replacement parts, 2-1
setting up, 2-2
shipping, 2-6
storage, 2-6
transporting, 2-5
troubleshooting, 5-1, 5-3
unpacking, 2-1
P–Q
packing list, 2-1
particle concentration, A-1
particle concentration accuracy, A-1
particle indicator light, 3-4
particle size range, A-1
PC/104 single board, 4-5
photometric reading, 5-6
power
connecting, 2-4
power requirements, A-2
primary concentration screen, 3-1
priming instrument, 2-4
product
literature, xiii
overview, 1-1
pump exhaust
troubleshooting, 5-5
purge flow line
location, 5-2
R
read commands, B-2
read displayed concentration, B-2
read laser, B-2
read record analog, B-2
read record control, B-2
read record data, B-2
read record status, B-2
read time on, B-3
read version, B-3
reader’s comments, B-1
removing protective cap on sample inlet, 2-2
removing wick, 2-8
replacing wick, 5-1
reservoir
removing cover, 2-9
response time, A-1
returning the UWCPC for service, 5-8
S
safety, v
sample inlet, 2-2
connection, 3-8
water, 5-4
Scanning Mobility Particle Sizer
TM
spectrometer, 1-1
schematic, 1-4
service, 5-8
set commands, B-4
set absolute pressure scale factor, B-4
set analog output voltage, B-14
set analog voltage span, B-14
set analog voltage zero, B-14
set auto zero function, B-14
set dead-time correction, B-5
set detector offset, B-6
set detector threshold, B-6
set drain mode, B-5
set dryer, B-4
set flow set point, B-7
set flow zero, B-7
set growth heater, B-7
set growth tube temperature set point, B-8
set injection prime, B-8
set injection time, B-9
set laser, B-9