61
8. Each exercise is accompanied by a guage of real time fit factor
performance as shown below. If the guage indicates green then
the fit is projected to be better than the pass/fail level you have
established for this respirator. If the gauge indicates red then it is
projected to be below the pass/fail level. The concentration of
particles in ambient air and inside the respirator are also shown.
9. The software alerts you when the fit test is complete. It calculates
and displays the overall fit factor for the fit test’s set of exercises.
It provides a clear indication of Passed or Failed which is
determined by comparing the overall fit factor to the Fit Factor
Pass/Fail Level.
10. If the test fails, the following is displayed.
To Next Page
Loading...
