TSI Instruments PORTACOUNT 8048 - APPENDIX A Specifications; Model 8040 Portacount Respirator Fit Tester

87
APPENDIX A
Specifications
(Specifications are subject to change.)
Model 8040 PortaCount Respirator Fit Tester
Size (W x D x H) ........................
9.5 x 8.5 x 6.75 in.
(24 x 22 x 17 cm)
Weight
Unit only ..................................
5.0 lb. (2.3 kg)
With standard accessories and
case .........................................
16.0 lb. (7.26 kg)
Fit Factor Range ......................
1 to greater than 10,000
Concentration Range ..............
0.01 to 2.5 x 10
5
particles/cm
3
Particle Size Range..................
0.02 to greater than
1 micrometer
Typical Fit Factor Accuracy ....
10% of reading up to fit factors
of 10,000
Temperature Range
Operation ................................
32 to 100°F (0 to 35°C)
Storage ...................................
-40 to 160°F (-40 to 70°C)
Flow Rate
Sample ....................................
350 cm
3
/min
Total ........................................
1,000 cm
3
/min (nominal)
Power Requirements ..................
100 to 250 VAC, 50 to 60 Hz
Alcohol
Hours per charge ....................
6 hours at 70°F (21°C)
Alcohol type ............................
Reagent grade isopropyl
(99.5% or better)
Carrying Case
Size (W x D x H) .....................
19.5 x 13.7 x 9.0 in.
(50 x 35 x 23 cm)
Pass/Fail Settings ....................
User-selectable: 0 to 10000
Communications ......................
Wi-Fi, USB-C, USB-A