TSI Instruments PRESSURA RPC30 Installation Instructions

_____________________
TSI and TSI logo are registered trademarks of TSI Incorporated. PresSura is a trademark of TSI Incorporated.
BACnet is a trademark of ASHRAE. Modbus is a registered trademark of Modicon, Inc.
LonWorks is a registered trademark of Echelon® Corporation.
MODEL RPC30 (-LON) PRESSURA
™
ROOM PRESSURE CONTROLLER
INSTALLATION INSTRUCTIONS
WARNING
The Model RPC30 (-LON) Room Pressure Controller must be wired to 24 VAC only. Wiring the unit to
110 VAC will cause serious damage to the unit and void the warranty.
The pressure sensor must be mounted through the wall between the controlled space (isolation room) and
referenced space (ante room / hallway).
Go to www.tsi.com to download the Operation and Service Manual for the Model RPC30.
These installation instructions guide the installer through the installation of the TSI Model RPC30 (-LON)
PresSura Room Pressure Controller. Please read these instructions thoroughly before beginning installation.
This product is classified by UL as to fire resistive properties only. See UL File R15545.
Figure 1: Typical Installation
Component List
Part Number
Qty
Description
800243
1
Pressure sensor
with cable
or
801913
1
Transducer Pick-
ups
800983/800984
1
RPC30 /
RPC30-LON Room
Pressure
Controller

TSI Instruments PRESSURA RPC30 Specifications

General

Brand	TSI Instruments
Model	PRESSURA RPC30
Category	Controller
Language	English