Need help?Do you have a question about the Tsun TSOL-M1600 and is the answer not in the manual?
Mandatory adherence to handling and safety instructions during installation, testing, and inspection.
Directions to be fully understood to avoid potential safety hazards including equipment damage or personal injury.
Mark the center of the PV module and install the micro-inverter with the LED side facing outside.
Connect micro-inverters using AC cables, observing maximum installation quantities per cable section.
Separate the AC connector, connect the cable to the correct port, and reassemble.
General| Max. Output Current | 7 A |
|---|---|
| Dimensions | 280 x 196 x 36.6 mm |
| Weight | 3 kg |
| Rated Power | 1600 W |
| Waveform | Pure sine wave |
| Max. Output Power | 1600W |
| Nominal Output Voltage | 230V |
| Nominal Frequency | 50 / 60 Hz |
| Power Factor | >0.9 |
| Output Voltage | 230V |
| Output Frequency | 50/60 Hz |
| Protection Features | Over Voltage, Over Temperature |
| USB Port | No |
To Next Page
