What to do if my Tsun TSOL-MP3000 Inverter shows GridVoltOverRating?
The GridVoltOverRating fault on your Tsun Inverter indicates that the AC power grid is abnormal. This fault should disappear automatically once the AC power grid returns to normal. If the issue persists, it may require further investigation.
How to fix OverTemp fault on my Tsun TSOL-MP3000 Inverter?
If your Tsun micro inverter is showing an OverTemp fault, check its installation to ensure it has adequate heat dissipation. If the problem continues, further inspection may be needed.
What to do if Tsun Inverter displays PV1VoltOver_Fault?
To address the PV1VoltOver_Fault on your Tsun Inverter, verify that the voltage of the PV module is below the maximum DC input voltage specified for the micro inverter. If the fault persists, further diagnostics may be necessary.
How to troubleshoot IsoFault on Tsun Inverter?
To resolve the IsoFault on your Tsun Inverter, check the PV module’s insulation to the ground, ensuring the insulation resistance is greater than 200K?. Also, confirm that the grounding connection of the inverter is reliable. If the fault remains, further investigation might be needed.
What causes GridCurrOverRating on a Tsun Inverter?
The GridCurrOverRating fault on your Tsun micro inverter suggests an internal issue. Try disconnecting the AC power to restart the micro inverter. If the fault reappears, further investigation may be needed.
Why does my Tsun TSOL-MP3000 Inverter show PV1VoltLow_Fault?
The PV1VoltLow_Fault warning on your Tsun Inverter often occurs in the morning or at dusk. If it appears during the daytime, inspect the connection of the PV module. If the fault persists, further investigation may be necessary.
What does GFCIOver30mAFault mean on Tsun TSOL-MP3000 Inverter?
The GFCIOver30mAFault on your Tsun micro inverter indicates an internal fault. Disconnect the AC power to restart the micro inverter. If the fault continues to appear, further investigation may be required.
What to do for Fault 24 or 25 on Tsun TSOL-MP3000 Inverter?
Faults 24-25 on your Tsun micro inverter indicate an internal fault. Try disconnecting the AC power to restart the micro inverter. If the fault reappears, further investigation may be needed.
What does Fault 28-67 mean on my Tsun Inverter?
Faults 28-67 on your Tsun micro inverter indicate an internal fault. Disconnect the AC power to restart the micro inverter. If the fault reappears, further investigation may be needed.
How to fix Fault 26 or 27 on a Tsun Inverter?
To address Faults 26-27 on your Tsun Inverter, check the open-circuit voltages of the module to ensure they are below the maximum DC input voltage of the inverter. If the fault persists, further diagnostics may be necessary.
Legal information regarding trademarks and intellectual property.
Defines the intended users of the manual.
Introductory section with important information for users.
Crucial safety instructions for installation and operation.
Explanation of safety symbols used in the document.
Overview of the TSOL-MP3000/MP2250/MS3000 micro inverter and monitoring system.
Details the physical components and labeling of the micro inverter.
Presents technical specifications for MP2250, MP3000, and MS3000 models.
Steps to verify package contents and initial checks before installation.
Guidelines for selecting an appropriate installation site and position.
Detailed procedures for mounting and connecting the micro inverter.
Overview of the system for monitoring micro inverter performance.
Instructions for installers to set up accounts and access the monitoring portal.
Guidance for end-users on downloading and using the TSUN SMART app.
Information on controlling active power remotely via logic interface.
Details the self-test feature for the Italian market.
Lists fault codes and corresponding troubleshooting steps.
General guidelines and procedures for maintaining the micro inverter.
Specific tasks and precautions for regular maintenance.
Procedures for storing and dismantling the equipment safely.
Instructions for environmentally sound disposal of the device.
Conditions, procedures, and exclusions for product warranty.
Outlines the roles and responsibilities of distributors and installers.
General| Model | TSOL-MP3000 |
|---|---|
| Category | Inverter |
| Output Power | 3000W |
| Peak Power | 6000W |
| Frequency | 50Hz/60Hz |
| Waveform | Pure Sine Wave |
| Cooling | Fan Cooling |
| Input Voltage | 48V DC |
| Output Voltage | 230V AC |
| Protection | Overload, Short Circuit |
To Next Page
