TSOL-MP3000/MP2250/MS3000
V1.0
4 -
Read This First
Dear customer, thank you for choosing the TITAN series micro inverter from TSUN. We hope
you will find our products meet your needs for renewable energy. Meantime, we appreciate
your feedback regarding our products.
A solar micro inverter, or simply micro inverter, is a plug-and-play device used in
photovoltaics, that converts direct current (DC) generated by a single solar module to
alternating current (AC). The main advantage is that small amounts of shading, debris, or snow
lines on any single solar module, or even a complete module failure, do not disproportionately
reduce the output of the entire array. Each micro inverter harvests optimum power by
performing maximum power point tracking (MPPT) for its connected module. Simplicity in
system design, lower amperage wires, simplified stock management, and added safety are
other factors introduced with the micro inverter solution.
This manual contains important instructions for TSOL-MP3000/MP2250/MS3000 micro
inverters and must be read in its entirety before installing or commissioning the equipment. For
safety, only qualified technicians, who have received training or have demonstrated skills can
install and maintain this micro inverter under the guide of this document.
Important Safety Information
During installation, testing, and inspection, adherence to all the handling and safety
instructions is mandatory. Failure to do so may result in injury or loss of life and damage to the
equipment.
Product Label
The following safety symbols are used in this document. Familiarize yourself with the symbols
and their meaning before installing or operating the system.
· DANGER indicates a hazardous situation that can result in deadly electric shock hazards,
other serious physical injury, or fire hazards.
WARNING
· WARNING indicates directions that must be fully understood and followed in their entirety
in order to avoid potential safety hazards including equipment damage or personal injury.
To Next Page
Loading...
