Tsun TSOL-MP3000 - Page 5

TSOL-MP3000/MP2250/MS3000
V1.0
-
5 -
· CAUTION indicates that the described operation must not be carried out. The reader should
stop using and fully understand the operations explained before proceeding.
The symbols on the micro inverter are listed below and illustrated in detail.
Symbol
Description
This device is directly connected to the public grid, thus all
work to the
inverter shall only be carried out by qualified personnel.
The components inside the inverter will release a lot of
heat during
operation. Do not touch metal plate housing during operation.
Please read the installation manual first before installation, operation,
and
maintenance.
This device SHALL NOT be disposed of in residential waste.
This device needs to be disconnected and left to stand for a
t least 5 minutes
before opening the cover.
This device does not use a transformer for the isolation function.
This device fulfills the requirements of the Radio Equipment Directive.
This device complies with the RoHS Directive.
This inverter fulfills the requirements of INMETRO.
This inverter fulfills the requirements of ANATEL, the certificate number
is 11057-23-15833.