What to do if my TTI FABRICATION Heat Pump is not starting?
If your TTI FABRICATION Heat Pump isn't starting, check if the main power is off. If it is, wait for the power to be reinstated. Also, ensure the switch is on. Replace any burnt-out fuses and switch the circuit breaker back on if it drops out.
Why is the TTI FABRICATION STRATOS 65 blowing air but not heating properly?
If your TTI FABRICATION Heat Pump is blowing air, but the heating isn't good enough, a few things could be happening. First, the air inlet or outlet might be blocked; clean them out. Second, there could be a 3-minute time lag protection activated, so just wait. Finally, the temperature might be set too low; increase it as needed.
Specifies the diameter for water connections and notes mandatory valve installations.
Defines optimal water flow rates for efficiency and to prevent damage, with warnings.
Instructions on how to set and adjust the desired water temperature using control buttons.
Safety measures related to power supply, children, storms, and long-term storage.
Important warnings about unit usage, connection integrity, and air outlet safety.
Further precautions on installation, temperature settings, airflow, and handling abnormal conditions.
General| Brand | TTI FABRICATION |
|---|---|
| Model | STRATOS 65 |
| Category | Heat Pump |
| Language | English |
To Next Page
