What to do if my TTI FABRICATION Heat Pump is not starting?
If your TTI FABRICATION Heat Pump isn't starting, check if the main power is off. If it is, wait for the power to be reinstated. Also, ensure the switch is on. Replace any burnt-out fuses and switch the circuit breaker back on if it drops out.
Why is the TTI FABRICATION CPST-65 Heat Pump blowing air but not heating properly?
If your TTI FABRICATION Heat Pump is blowing air, but the heating isn't good enough, a few things could be happening. First, the air inlet or outlet might be blocked; clean them out. Second, there could be a 3-minute time lag protection activated, so just wait. Finally, the temperature might be set too low; increase it as needed.
Specifies required water flow rates for optimal heat pump performance.
Ensures safe electrical connections performed by qualified electricians and proper component handling.
Instructions on how to set and adjust the desired water temperature.
Guide to setting and cancelling the automatic timer functions.
Key safety measures regarding power supply, weather, and long-term storage.
Prohibitions on unit usage, connection weight limits, and air outlet safety.
General| Brand | TTI FABRICATION |
|---|---|
| Model | CPST-65 |
| Category | Heat Pump |
| Language | English |
To Next Page
