TTI TCB-1100 - Memory Channels and Connections; Memory Channel (ME;MR) and Antenna Port

and ‘DW’ will be displayed. And change the channel (changed channel : sub
channel). The radio check the sub channel and stay for 0.5 second every 5
seconds. Press PTT at one of both channels, PTTed channel become main
channel.
If no receive signal for 5 seconds after PTT, DW will start again.
15. ME/MR (M1, M2. M3)
Select the channel and press M1(M2, M3) for longer than 1 second. Then
‘M1’(M2, M3) will blink and the channel will be memorized.
1. ANT
Connect plug of the antenna cable (MJ type).