To Next PageTo Next Page
Need help?Do you have a question about the TTI TCB-1100 and is the answer not in the manual?
Details initial features like audio sensitivity, RF interference reduction, and user interface elements.
Introduces the steps for installing the C-Five transceiver and its mounting.
Covers checking vehicle compatibility and selecting the optimal location for the CB radio.
Guides on connecting the radio's power in vehicles with negative ground systems.
Details the process of attaching the mounting bracket and positioning the main unit.
Explains how to connect an external speaker and the antenna to the radio.
Guides on choosing, positioning, and installing the optimal CB antenna for performance.
Covers the final steps of antenna installation and tuning for optimal performance.
Discusses how terrain, weather, and noise sources impact CB radio range.
Identifies and describes the functions of the buttons and indicators on the front panel.
Explains the functions of the buttons on the microphone, including FUNC, CH UP/DOWN, and VR UP/DOWN.
Details how to adjust volume, change channels, and use the FUNC button for various settings.
Explains how to configure Tone Squelch, RGB lighting, and beep functions.
Describes how to use the SCAN function to monitor channels and the DW for dual watch.
Details saving channels to memory and connecting the antenna cable.
Explains electronic power, PTT, monitor/squelch, and proper microphone usage.
Provides a table listing channels and their corresponding Tone Squelch frequencies.
Outlines general features, system type, modulation, and operating temperature.
Details transmission specs like aerial impedance, power output, and frequency deviation.
Covers demodulation type, sensitivity, audio output, and distortion for receiving signals.
Details initial features like audio sensitivity, RF interference reduction, and user interface elements.
Introduces the steps for installing the C-Five transceiver and its mounting.
Covers checking vehicle compatibility and selecting the optimal location for the CB radio.
Guides on connecting the radio's power in vehicles with negative ground systems.
Details the process of attaching the mounting bracket and positioning the main unit.
Explains how to connect an external speaker and the antenna to the radio.
Guides on choosing, positioning, and installing the optimal CB antenna for performance.
Covers the final steps of antenna installation and tuning for optimal performance.
Discusses how terrain, weather, and noise sources impact CB radio range.
Identifies and describes the functions of the buttons and indicators on the front panel.
Explains the functions of the buttons on the microphone, including FUNC, CH UP/DOWN, and VR UP/DOWN.
Details how to adjust volume, change channels, and use the FUNC button for various settings.
Explains how to configure Tone Squelch, RGB lighting, and beep functions.
Describes how to use the SCAN function to monitor channels and the DW for dual watch.
Details saving channels to memory and connecting the antenna cable.
Explains electronic power, PTT, monitor/squelch, and proper microphone usage.
Provides a table listing channels and their corresponding Tone Squelch frequencies.
Outlines general features, system type, modulation, and operating temperature.
Details transmission specs like aerial impedance, power output, and frequency deviation.
Covers demodulation type, sensitivity, audio output, and distortion for receiving signals.
General| Frequency Range | 26.965 - 27.405 MHz |
|---|---|
| Mode | AM/FM |
| Output Power | 4W |
| Channels | 40 |
| Microphone connector | 6-pin |
| Modulation | AM/FM |
| Channel Spacing | 10 kHz |
| Power Supply | 13.8V DC ±15% |
