performance.
Installations using the cigarette lighter socket for power require an extra
ground wire from the radio chassis to the vehicle if the radio is not fastened
to a grounded part of the vehicle.
Mechanical mounting.
Step 1 : Heeding the caution, use the mounting bracket as a template for
marking the location of screw holes under the dash. Use an awl, nail or other
sharp pointed object to mark the hole locations.
Step 2 : Drill a 3.2 mm diameter hole for each screw hole in the mounting
bracket. Attach the bracket to the dash with metal screws provided.
Extreme care should be exercised when drilling into the dash to avoid
damage to under-dash electronic ignition, cruise control, instrumental and/ or
accessory wiring.
Step 3 : Position the main unit between the bracket arms in line with the
retention knobs, Set the angle for optimum operating comfort and accessibility.
To Next Page
Loading...
