6. EL-POWER (electronic switch)
Press and release it and the radio will be on/off only when the POWER lock in the
main unit.
7. PTT
Press PTT to transmit and release to receive.
8. MC/OSQ
Press and release continuously and the channel change to M1 to M2 to M3 to last
channel used. Press it longer and relase, it will operate as monitor button.
9. Mic unit
Hold the mike about 3-5 from your mouth and speak in a normal voice.
z Magnetic of mike back can hang on to the steel cabinet of the unit.
T-SQ table
To Next Page
Loading...
