TTI TCB-1100 - Specialized Operating Modes; T-SQ, RGB, and BEEP Settings

Press and release FUNC button two times and ‘T-SQ’ will blink. Select the channel
by depressing upper button and lower button of FUNC and the channel will be
memorized after 2 seconds or at the time of pressing PTT key of mike.
RGB
Press and release FUNC button three times and ‘RB’ will blink. And n select ‘ on’
or ‘off’ with upper button or lower button which will be memorized after 2 seconds
or at the time of pressing PTT key of mike.
BEEP
Press and release FUNC button four times and ‘ BP’ will blink. And select ‘on’ or
‘off’ with upper button or lower button which will be memorized after 2 seconds or
at the time of depressing PTT key of mike.
10. AM/FM button
Select AM or FM by press and release it.
11. T-SQ (tone squelch)
‘T-SQ’ will be displayed when you use the channel with T-SQ assigned.