TUBES EVE - App Features and Control; Temperature Control via App; Lighting Control via App; Automatic Mode (Weekly Programming)

16
EN
cod. MAN#EVE - Luglio/July 2019
The TUBES Plug&Play App also allows
you to make the most of all the Eve fea-
tures previously described. Addionally,
there are features that can be used only
via app and these are listed below:
• Temperature Control
NB: this can only be used via the
TUBES Plug&Play App.
Eve’s heang temperature can only
be controlled via the TUBES Plug&Play
App. All you need to do to set the de-
sired temperature is to move the cur-
sor along the temperature control bar
on the Eve home page. When the set
temperature is reached, Eve remains in
maintenance mode, that is it keeps the
room at the set temperature (automa-
cally switching the resistances on and
off according to the temperature mea-
sured).
Remember that the temperature set via
the app remains stored and the device
will be automacally set to that tem-
perature every me it is switched back
on again. The only way to change the
temperature without the app is to use
the reset to factory sengs procedure,
which restores the temperature, open
window detecon and weekly program-
ming to their original sengs.
• Lighng Control
The brightness of Eve’s lighng can be
controlled via the TUBES Plug&Play App
too. By clicking “lighng” in the extra
features at top right, you only need to
move the cursor along the brightness
control bar unl you reach the desired
level.
Remember that the brightness of the
light set via the app remains stored and
the device will be automacally set to
that brightness every me it is switched
back on again.
• Automac Mode
(Weekly Programming)
NB: this can only be used via the
TUBES Plug&Play App.
The Automac Mode allows you to
pro¬gramme the heang in advance
(24 hours a day and 7 days a week) to
maximize comfort in your home and
re-duce ener¬gy wastage even when
you are away from home. More spe-
cifically, it allows you to set the mes
when you want to turn the heang on
and offe-very day of the week.
To access Weekly Programming with
the app, click the extra features icon at
top right and select “Weekly Program-
ming”. Select the mes of day when
you want the heang to be turned on.
A white circle around the selected me
shows when heang is set to be tur-
ned on. Then enable the “Automac
Mode”.
During the mes when heang is on,
Eve operates at medium power (mo-
derate ow) to reach the room tem-
perature set on the home page. When
Weekly Programming is set via app, the
MODE control becomes YELLOW
When the temperature set for the
programmed me period is reached,
Eve does not switch off, but remains
in maintenance mode (automacally
switching on and off according to the
detected temperature).
• Open window detecon
NB: this can only be used via the
TUBES Plug&Play App
When the device detects a sudden drop
in temperature (presumably because
a door or a window has been opened)
the heang is temporarily switched off
for 30 minutes or unl the room tem-
perature starts to rise again.
When an open window is detected, the
LED on the MODE key ashes with
a colour corresponding to the selected
mode of operaon.
To use this feature with the app, click