Note:
It is strongly recommended that two
people participate in this assembly step.
Loosely Tighten
70%
Loosely tighten all hardware in this step.
DO NOT Fully Tighten. Some component(s)
may need pre-assembly and or alignment
during the assembly process.
Step 4
Step 4 Assembly List
Item Qty. Description
4 2 SELECTOR POST
26 2 NYLON SPACER 3/8 X 7/8 X 3/8
31 2 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 2 9/16
34 2 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 3
43 8 FLAT WASHER SAE Z/P 3/8"
44 4 NYLON INSERT THIN PATTERN LOCK NUT Z/P 3/8-16
Note:
Position reference numbers
facing toward the inside of
the unit.
16 CDP-300 Dual Adjustable Pulley System W/150 lbs Weight Stacks
www.tuffstuffi tness.com
To Next Page
Loading...