37
Disassembly
To disassemble the T&N Adjustable Frame, you must first
disconnect the Bed Frame from the power source. Then,
follow the assembly instructions in reverse order. To
minimize the risk of pinching when transporting the
Side Rails, secure all moving parts with packaging tape.
Transportation
After it has been fully assembled, the Bed Frame should
only be moved short distances within the same room.
Lifting the Bed Frame requires two people. To lift the
Bed Frame:
• Ensure that the Bed Frame has first been moved to
the Sleeping Position.
• Stand at opposite sides of the Bed Frame (long sides)
and grip the Base Platform.
CAUTION
Risk of minor or moderate injury through crushing
Tilting the Bed Frame when lifting or moving the T&N Adjustable
Frame may lead to minor or moderate injury through crushing.
• Keep the Bed Frame level while lifting or moving it
• Do not attempt to lift or move the Bed Frame alone
NOTICE
Moving the Bed Frame on its side or upside down may lead to
damage to the product.
• Only move the Bed Frame while it is in horizontal position
(Platforms facing upwards)
• Disassemble the Bed Frame before moving it to a different location
To Next Page
Loading...
