Introduction Mobile Belt Loader Model 660
Operation Manual
CD397-Oper Introduction - 1 - 19
HOWTOUSETHISMANUAL
This manual contains an introduction, safety information, and one chapter. Refer to the Table of
Contents at the front of this manual and in the chapter for details of content.
The page numbering system in this manual is a three-part number. The first number represents
the chapter in which the page appears, the second number indicates the section within that chap-
ter, and the third number is the page number within that chapter.
The following symbols are examples of the Warnings, Cautions, and Notes used in this manual.
These Warnings, Cautions, and Notes will appear immediately prior to the procedure.
• The WARNING provides notice of potential safety issues that could, if ignored, result in
serious personal injury or, possibly, death.
• The Caution provides notice of potential safety issues that could, if ignored, result in
damage to equipment.
• Notes highlight issues or specific information that should be paid particular attention to
allow for an error-free procedure or provides important information concerning the proce-
dure.
NOTE:
Important Notice: TUG recommends that the vehicle operator thoroughly study the
contents of this manual before attempting to operate the vehicle.
WARNING: SAFETY NOTES THAT MUST BE FOLLOWED TO AVOID SERI-
OUS INJURY TO PERSONNEL OR EVEN DEATH.
CAUTION: Safety notes that need to be followed to prevent damage to equip-
ment.
NOTE:
Important non-hazard information for the user.
To Next Page
Loading...
