For the rear blind, we recommend installing the blind
10mm below the front blind and 10-15mm from the
window, depending on the depth of the recess.
Tightener on the rightTightener on the left
Hold the blind securely in place and turn the
tightening wheel to tighten the blind in place.
If the tightener is on the left side of the blind turn it
towards you. If it’s on the right, turn it away from you.
Cap on the rightcap on the left
Once the blind is secured in place, turn the end cap
until it locks against the tightening wheel. This will
lock the tightening wheel in place.
If the cap is on the left side of the blind turn it away
from you. If it’s on the right, turn it towards you.
For larger blinds:
Installation Guide
Double Roller Blinds
Next, fit the sheer blind at the back. The process is exactly the same as for the front blind.
Page 4 of 6
To Next Page
Loading...