●
UPS function
This product has a bypass mode, does not need to pass through the battery, can directly output from the AC.
In UPS mode, when the AC input power of the mains is cut off due to a power outage, the ac input power of the mains can
be used in about automatic switch to product battery power within 10 ms to ensure AC output.
● UPS Connections
As shown in the figure below, connect the product between the socket on the wall and the electrical appliances, and the
power of the product is in the ON state. When you turn on the power of the electrical appliances, they will directly use the
AC power of the power grid.
In this state, when the power grid is cut off, it will automatically switch to the product's internal battery to supply power.
※ In UPS mode of the China, United Kingdom, Europe and South Korea, AC output of the maximum power below 800W, AC
output over 800W, " " AC output icon flashes indicating overload.
※ The charging and discharging at the same time function of the UPS can work properly only when the F800 is connected
with AC plug.
Charge & Discharge Simultaneously
To Next Page